A jigger is the tool a bartender picks up more than any other, and a good one makes speed and accuracy the same motion. This Japanese-style jigger from A Bar Above is tall and slim, which keeps the pour steady, and it has engraved lines every quarter ounce from a bar spoon measure up to 2 oz. That means one tool covers most recipes without switching. It is 304 stainless steel with a reinforced rolled lip, so it should survive being dropped into a well a few hundred times. A bartender who already owns a jigger will still use a second one, since jiggers disappear between shifts. It is the cheapest way to give a working bartender something they will touch on every ticket.
Pros
- Marks every quarter ounce up to 2 oz
- Heavy 304 stainless steel
- Rolled lip pours clean
Cons
- Narrow cup is slower to fill for beginners
- Engraved marks are hard to see in dim light
Best for: craft cocktail bartenders
A Hawthorne strainer sits on top of a shaking tin and holds back ice and fruit while the drink pours out. The difference between a good and a bad one is the spring: a loose coil lets ice shards through. This A Bar Above strainer uses a high-density spring and fits standard shaking tins, mixing glasses and pint glasses. The listing points to a cut-away design that keeps the metal from rubbing the side of the hand, which matters to a bartender straining a hundred drinks a night. It is mirror-finished stainless steel and simple to clean. Bars stock house strainers, but many bartenders bring their own tools, and this is a common one to bring.
Pros
- Tight spring keeps ice shards out
- Fits standard tins and mixing glasses
- Shape is easier on the hand
Cons
- Hand washing keeps the spring tight longer
- Plain gift on its own; pair it with a jigger
Best for: high-volume cocktail bars
Shaking tins take a beating behind a busy bar, and a pair that sticks together or leaks slows the whole line. Cocktail Kingdom calls its Koriko tins the industry standard, and they are a common sight on cocktail bars. The set pairs a small 18 oz weighted tin with a large 28 oz weighted tin, which together hold two drinks. The listing promises a tight seal and an easy break apart, and the tins are dishwasher safe. Weighted tins hold their shape longer than thin ones. A bartender may already have a set at work, but tins dent and walk off, and a fresh set for the home bar or a second job never goes unused.
Pros
- Common on professional cocktail bars
- Seals tight, separates easily
- Weighted, dishwasher safe
Cons
- Needs a separate strainer
- No jigger or spoon included
Best for: bartenders who shake all night
Bartenders who work catered events, pop-ups or guest shifts carry their kit in a bag, and a messy backpack full of loose steel is how jiggers go missing. This Beemojo roll is 16 oz waxed cotton canvas with 16 pockets, top-grain leather handles and a removable shoulder strap. Tools slide into their own slots, the bag rolls up, and it carries like a small duffel. The listing says the canvas resists water, which counts behind a wet bar. It ships empty, so pair it with the jigger, the spoon and the strainer on this list for a complete gift from a team. A bartender who works one bar and never leaves it will get less out of it.
Pros
- 16 pockets keep tools in place
- Waxed canvas with leather handles
- Rolls up for travel
Cons
- Tools sold separately
- Less useful for a bartender at one fixed bar
Best for: event, catering and guest bartenders
Most bars play music loud, and the bartender stands closest to the speakers for the whole night. Loop Experience 2 earplugs lower volume by a listed 17 dB SNR, and the high-fidelity design aims to cut volume without muffling everything, which matters to someone who still has to hear an order across the bar. The box includes four ear tip sizes from XS to L, so fit is not a guess, and a small keychain case. They are certified hearing protection, according to the listing. They also look like small rings, not foam plugs, which helps in a job where appearance counts. A bartender at a quiet hotel lounge may not need them, but anyone at a club, a music venue or a sports bar will.
Pros
- Lowers volume while keeping voices clear
- Four tip sizes in the box
- Discreet look behind the bar
Cons
- Easy to lose without the case
- Less useful at a quiet bar
Best for: bartenders at loud bars and clubs
The Bureau of Labor Statistics describes bartending as repetitive work, and anyone who has shaken drinks through a Friday rush can point to the wrist that feels it. These Comfytemp wraps hold a gel pack against the wrist and the base of the thumb, and the gel stays soft enough to bend when frozen, so it wraps around instead of sitting on top. The pair means both hands at once or one in the freezer while the other is in use. They can also be warmed, according to the listing. This is a comfort gift for the couch after a shift, not a medical fix, and a bartender with real pain should see a doctor. As a small, practical thank-you, it lands.
Pros
- Fits the wrist and thumb
- Stays flexible when frozen
- Two wraps in the pack
Cons
- Looks clinical as a gift
- Needs freezer time before use
Best for: bartenders with sore wrists after a shift
Clear ice is a small obsession in the cocktail world, because cloudy ice melts faster and looks worse in the glass. Bars buy it in blocks or run special machines, while home freezers make cloudy cubes. The True Cubes mold uses directional freezing to make four 2-inch clear cubes in an ordinary freezer from tap water. The listing says America's Test Kitchen named it the best clear ice mold. It is BPA-free silicone and needs nothing else. For a bartender, it upgrades the home bar to the standard they hold at work, and it works for sodas and iced coffee too. It does take most of a day to freeze, and it takes up freezer space.
Pros
- Clear 2-inch cubes from a home freezer
- No special water or machine
- Works for any drink
Cons
- Only four cubes per batch
- Takes up freezer room
Best for: bartenders setting up a home bar
A flat bar key lives in a bartender's back pocket for the whole shift, and it gets used hundreds of times a night. This one from My Personal Memories is solid stainless steel, 7 by 1.5 inches, and takes up to two lines of engraving. A name and the bar's name work, or a short inside joke from the crew. It costs about the same as a decent mug and gets far more use. Because it is engraved, it is also less likely to walk off at the end of the night, and if it does, someone knows whose it is. Order a few days early for the engraving. Bartenders who use a speed opener with a different shape may treat it as a keepsake.
Pros
- Gets used every shift
- Two lines of engraving
- Solid stainless steel
Cons
- Engraving adds a few days
- Paddle shape is a matter of taste
Best for: a bartender's back pocket
The Cocktail Kingdom Essential Cocktail Set is the kit many cocktail bartenders would buy themselves if they bought themselves things. It includes a seamless Yarai mixing glass at 550 ml, a 33.5 cm Hoffman bar spoon, a Japanese-style 1 oz and 2 oz jigger, a pair of Koriko weighted shaking tins and a Koriko Hawthorne strainer. That covers stirred and shaken drinks from start to finish. Everything is stainless steel except the glass. It makes a strong team gift for a bartender leaving for a new bar, opening their own place or finishing a long run as bar lead. If you buy it, skip the single tins and strainer on this list, since the set includes both.
Pros
- Complete stirred and shaken kit
- Pro-grade brand
- Strong farewell or promotion gift
Cons
- Repeats tools a working bartender may own
- Glass mixing glass can chip
Best for: a bartender who wants a pro kit at home
The Bureau of Labor Statistics notes that bartenders should be able to carry cases of supplies weighing up to 50 pounds, and that they spend hours walking or standing. Shoulders and calves feel it by close. The Theragun Relief is the gentlest model in the Therabody line, built for daily comfort rather than athletic recovery. It has three speeds, one button, three attachments for tender or tense muscles, and a patented triangle grip that helps reach the upper back without help. The motor is quiet, according to the listing, which matters at 3 a.m. with a roommate asleep. It costs more than a coworker should spend, so it fits a partner or a crew pooling money for a birthday.
Pros
- Gentle enough for daily use
- Triangle grip reaches the back
- Quiet motor
Cons
- Less power than other Theragun models
- Too pricey for one coworker
Best for: sore shoulders and calves after a double